Lennox Furnace Error E200 / E201: No Flame / Ignition Failure
Error E200 / E201 on your Lennox furnace means the control board did not detect a flame after the ignition sequence. Modern heating systems use computerized control boards that monitor system operation and store fault codes when problems occur. BC Wide Home Services Ltd, doing business as BC Wide Heating & Air Conditioning has extensive experience diagnosing and repairing Lennox error E200 / E201 across Greater Vancouver.
Cost to Fix Lennox Error E200 / E201
The cost to resolve error E200 / E201 on your Lennox furnace depends on the root cause. Simple fixes like cleaning a flame sensor or replacing a capacitor are relatively affordable. More involved repairs such as gas valve replacement, control board replacement, or heat exchanger service will be more significant. BC Wide Home Services Ltd, doing business as BC Wide Heating & Air Conditioning provides a detailed diagnosis and written estimate before any work begins, so you can make an informed decision about the repair.
Preventing Lennox Error E200 / E201 in the Future
Regular maintenance is the best way to prevent error E200 / E201 and other fault codes on your Lennox system. Annual professional maintenance includes cleaning the flame sensor, inspecting wiring connections, checking gas pressure, verifying proper airflow, and testing all safety controls. BC Wide Home Services Ltd, doing business as BC Wide Heating & Air Conditioning offers comprehensive maintenance programs for Lennox equipment. Well-maintained systems have fewer error codes and emergency service calls.
What Error E200 / E201 Means on Your Lennox Furnace
Error E200 / E201 on Lennox furnace systems indicates the control board did not detect a flame after the ignition sequence. This diagnostic code is generated by the system's control board when sensor readings or operating conditions fall outside the expected range. Lennox equipment uses sophisticated diagnostics to help technicians pinpoint problems accurately. The error code is stored in the control board's memory and can be retrieved even after the system has been reset.
Common Causes of Lennox Error E200 / E201
Error E200 / E201 on Lennox equipment can be caused by several factors. The most common causes include: faulty ignitor, gas supply interruption, dirty flame sensor, control board failure. BC Wide Home Services Ltd, doing business as BC Wide Heating & Air Conditioning technicians systematically test each potential cause to identify the root issue efficiently. The specific cause in your situation will depend on your system's model, installation configuration, and operating history.
How to Respond to Lennox Error E200 / E201
When you see error E200 / E201 on your Lennox system, start with these steps: Check that the power supply is on and stable. Verify the gas supply valve is open if applicable. Check that the gas valve is open and the filter is clean. Reset the system once and observe. If the error persists or returns after resetting the system, professional diagnosis is recommended. Do not repeatedly reset the system without addressing the underlying cause, as this can lead to component damage or safety hazards.
Safety Reminder
If you smell gas, suspect carbon monoxide or believe there is an immediate danger, leave the property and contact emergency services or the appropriate gas emergency authority. Do not remain inside — exit the building immediately and call for help from outside.